Michael Sherve
Comments
-
https://learn.carveco.com/toolpaths-and-machining/maker-plus-machining-features/panel-tiling-toolpaths/ I know I am not giving you a direct answer but Leighton did an excellent video dealing with t...
-
Out of curiosity do you have your Text's on another relief layer? (good use, and idea) And when you did your toolpath were they active (the other layer)? If they were on different layers you have y...
-
Joe, Down in the lower rt. side of the screen is the word support, use that, it will go directly to the support staff, they are the ones you need to get a hold of (they know the codes and stuff, ...
-
There is no reason to be red faced, we all hit the miss "Q"s, I just remember mine so well, and it's a pleasure to help so frustration does not rule the day or week. mike
-
That in of itself is the font. Choose another font and you will see. mike
-
I have used this technique for a while now, very seldom does it let me down. mike
-
Super easy, run one but leave about .100 depth, then run another last with the compression bit but at full depth. I would make a different vector about .04" bigger then the part or a little more ar...
-
In the vector tools select create ellipse, If that doesn't work for you you can always try to node edit to get it around your model too. mike
-
There isn't any need for an oval setup, go with the setup of "If you want to cut an oval out of some material that has a dimension of 5 inches wide by 12 inches long" Your setup is finished, if ...
-
If you didn't get the link here it is: https://we.tl/t-a1FygK3Wm3 I think. mike