Michael Sherve
Comments
-
Okay be prepared for a lone one, It takes longer to explain than to do. Steps 1) Open (I think you're using maker so I'll use it) Maker, model size is 7 inches in "Y" and 15 inches in "X". 2)...
-
Is this what you're after. I work with the full version of Carveco (not Maker or the Plus side of things) So a lot of what goes on in Maker and Maker Plus is totally different than what I use so fo...
-
Ray, Which variant are you using, and what are you having difficulties with that's setting you back. Is it the text? Is it making it raised? V-grooved. There are thing that I can do, like poi...
-
Mark, Some pics for you, I had to find out what was available in maker and maker plus before I said anything (I liked the way Elina said it) a pic is worth a 1000 words here are a few in case y...
-
William, I'm trying to find out how to run "maker" and the "plus" so I know what I'm talking about (to give clear, correct and concise point (so as to not lead astray) Okay I said I would add so...
-
That's super cool, I remember running my first job, I was stoked to the max. When you bring in a file it'll be blue (I think) you should have the option on how to paste the thing in, either merg...
-
William, This what you're after? mike You will notice that I changed the way I set a relief in (in the cookie cutter) I changed it to add instead of merge-high it's set to add, I did ...
-
Ray, I'm in the PNW (Seattle area) What help do you need, You can always ask here, I'm sure someone will answer (hopefully). mike
-
When I do reliefs I take a set of calipers get the thickness of the material I then do my toolpaths I zero from the top of the material. If I am doing just 2d cut outs I zero from the table. Okay g...
-
Matt, Could it be it was a nasty file? I have received those and the fellow I received them from was so amendment that his files were perfect until I showed up at his office to have him open the...