Brady Watson
High Definition 3D Scanning www.IBILD.com
Comments
-
Bill, I do...CarveCo does permit higher resolution relief generation than Vectric, and a few other unique tools and features on the CAD side of things. There are certain CAM functions as well that ...
-
Great idea Mike.
-
3 options... 1) Create a toolpath for each pencil using toolpath template(s). 2) Hand edit GCode with pause keyword/statement/routine for your controller for each line (really not hard - copy/paste...
-
The thing is...the vcarving engine isn't made for that type of tool. It's only made for either a proper vbit with a sharp point or a ball end mill. Taper tools are not officially supported with tha...
-
The tool is most likely not defined properly. The specs listed in the tool database most likely do not match real world measurements. This is actually quite common with v-bits where the advertised ...
-
There are several cheap or free programs out there specifically made for designing functional airfoils. Even NASA has some for download. Years ago I did a project using WinFoil for a customer. Ther...
-
Did you get 'ducted 🤔🤣
-
Tiffany, Have you been successful creating a very simple toolpath like just cutting out a square - going through the routine of toolpathing the vector shape, saving out the toolpath using the post ...
-
Try setting your tolerance to 0.001"/0.01mm and recalculate.
-
Just select the vectors again and click on calculate toolpath.