Jeff Cable
Activity overview
Latest activity by Jeff Cable-
Jeff Cable created a post, AnsweredFirst 3D Carve using Carveco Maker.
I have posted this so it can draw the proper critique. This was my first start to finish 3D carve in Carveco Maker. I used my five free credits at CNC clipart to download the image and carve it. I ...
-
Jeff Cable created a post, Possible issue with Carveco Maker.
I use Carveco Maker from a Mac computer via Parallels in a purchased copy of Windows Home 10. For the most part it seems to work really well and it is hard to tell one is working through a virtual ...
-
Jeff Cable created a post, AnsweredReducing machine time for 3D relief models
Hello All. What strategies can one use for shaving time required to carve a model that has to show the detail? My example relief model shows a few small details that I wish to portray. The toolpa...
-
Jeff Cable commented, Hi John, I am an SO3 owner and this issue of Z axis crashing is known about but not resolved. There appears to be a software conflict between Z axis position and BitSetter determined Z height valu...
-
Jeff Cable commented, Thanks for this information. I will do that after I have installed a duet. It is an upgrade I have been considering for some time and I had no idea whether the Carveco Maker software could write th...
-
Jeff Cable created a post, Improving resolution of finishing.
I have just started to use Carveco maker and my first 3D carve was a little disappointing. The images below show the model (from the 3D relief library) and the simulation. I used a 1/4" square endm...
-
Jeff Cable created a post, AnsweredCarveco Maker and Duet 3 controller.
Hello All. I have a Shapeoko SO3 and Carveco Maker writes any toolpath(s) to it via the appropriate post processor. Does Carveco Maker use a post processor that will right to a Duet 3 controller? T...
-
Jeff Cable commented, Thanks for the advice. I have already watched the demonstration video several times. I guess that I will have to go through it again. My interest for this enquiry was to see if the narrow angle of ...
-
Jeff Cable commented, Hello. Thanks for the response. I am using the vbit pathway because the ball engraver head is very small at 1mm in diameter. The technique I want to use is detailed here: https://youtu.be/aWqHqqDtp...
-
Jeff Cable commented,