Lonnie Clark
Comments
-
Richard Gonzalez Thank you, I did not know. I was getting close to purchasing another software too. This update will likely ensure I stay within the Carveco family.
-
I'm still on 1.38. Sorry, I thought I had updated it too. Doing that now. Thank you
-
Thanks for the input. Just to clarify, I’m not actually creating any profile toolpaths — the Area Clearance toolpath itself is generating one for some reason, even though I’ve checked the option to...
-
Here is a video of it. I stopped the recording shortly after it moved to the center of the shape. If I had let it finish, the whole shape would have been gone.https://www.dropbox.com/scl/fi/7p02b...
-
Does the toolpath depends a lot on the sequence of you choosing which vector first, if it does change that, again sorry if this is a stupid question.I set all my toolpaths up separately and this i...
-
No, the part that breaks free is waste. Normally, I clear the whole shape with an Area Clearance toolpath. It would start in the center of the shape and work outward before each step down. It would...
-
I appreciate you trying. I’ve read that, and what that person describes is the issue Jessica Fig and I ran into when trying to use Carveco for a project similar to what I posted. That’s why I piggy...
-
My apologies; I got excited before I understood what the video you posted was about. If it can be done, the following is an example of what I and maybe what the original poster is looking for with ...
-
Thank you, Michael, My search capabilities must suck because I was having no luck finding anything that was not vectric
-
So does that mean we can't do figurines with the rotary tool?