Lonnie Clark
Activity overview
Latest activity by Lonnie Clark-
Lonnie Clark commented, Thanks for the input. Just to clarify, I’m not actually creating any profile toolpaths — the Area Clearance toolpath itself is generating one for some reason, even though I’ve checked the option to...
-
Lonnie Clark commented, Here is a video of it. I stopped the recording shortly after it moved to the center of the shape. If I had let it finish, the whole shape would have been gone.https://www.dropbox.com/scl/fi/7p02b...
-
Lonnie Clark commented, Does the toolpath depends a lot on the sequence of you choosing which vector first, if it does change that, again sorry if this is a stupid question.I set all my toolpaths up separately and this i...
-
Lonnie Clark commented, No, the part that breaks free is waste. Normally, I clear the whole shape with an Area Clearance toolpath. It would start in the center of the shape and work outward before each step down. It would...
-
Lonnie Clark created a post, Area Clearance Toolpath Cutting Perimeter First
Carveco Maker+Version: 1.61Build: 2025-08-29-1429-ffdbe91 Hi I’m working on a carve where I need to break it up into different Area Clearance toolpaths to clear some tricky areas, and I need the t...
-
Lonnie Clark commented, I appreciate you trying. I’ve read that, and what that person describes is the issue Jessica Fig and I ran into when trying to use Carveco for a project similar to what I posted. That’s why I piggy...
-
Lonnie Clark commented, My apologies; I got excited before I understood what the video you posted was about. If it can be done, the following is an example of what I and maybe what the original poster is looking for with ...
-
Lonnie Clark commented, Thank you, Michael, My search capabilities must suck because I was having no luck finding anything that was not vectric
-
Lonnie Clark commented, So does that mean we can't do figurines with the rotary tool?
-
Lonnie Clark commented, I don’t think my question was answered. I’m trying to figure out why it automatically selected 'Do Multiple Z Passes' when I created a new toolpath. The same thing happened when I tried to edit an ...