Michael Sherve
Comments
-
Ashwind, In using the vector tools in this regard the vectors have to touch in order for there to be a subtract. It might be beneficial if you would give a picture of what you are trying to do,...
-
Or you, if you were making a panel with just a v-grove with sharp corners us the same toolpath 2 times with 4 rectangles like I did here
-
If you are then the "V-bit carving toolpath" is what you want to use, you'll need to clean out the inside with a larger bit then use the 45 for the finish, The thing is you'll still need to make...
-
Need clarification. Are you after this?
-
I'm not offended, just trying to help. I don't think the software or support within Carveco that are arrogant, we all see things from our own perspective, I don't know what kind of work it takes to...
-
I really don't know, I have and use the Pro side of things, so I know it's there for me, but above support wrote this. Carveco Support Community Admin 27 February 2023 at 05:01 (...
-
I'm a customer also, and hoping I don't sound arrogant. I'll have to look at the settings to figure out some stuff, but in reality I have my own stuff to do, not really looking to start anythi...
-
Collin, Which part of Carveco do you have? If you have the Pro or Maker Plus or Maker. First if you have anything but the Pro I'll have to install them before I respond in anyway so I don't s...
-
-
Rich, I'm the type to try to look for a solution, been doing that my whole life. I do appreciate it when someone can use common sense in their explanations mine are more direct (this works, this...