Carveco Support

1. Community
2. Maker & Maker+ Support
3. Every toolpath saved has a starting point offset in both X and Y

Hi Darin Murphy, Line 4 in your supplied g-code includes the origin (X0.000Y0.000), whereas Line 5 includes the start point in the toolpath (X11.938Y11.938). There is 11.938mm of travel involved be...

• View comment
• Created 03 July 2023 13:16
• 0 votes

1. Community
2. Maker & Maker+ Support
3. Error Saving Toolpath: Selection Only Contained Open Vectors

Hi Emanuel Matos, Your post has been escalated to a Support Request by Carveco Support, and the associated ticket is #14167. Please respond to the Support Request. Thanks for your time and cooperat...

• View comment
• Created 03 July 2023 10:50
• 0 votes

1. Community
2. Feature Discussion
3. Feature Suggestion: Spiral Vector Tool

Hi Jon Gardner, The Guilloche tool already included within our flagship Carveco product might meet your requirements. Thanks for your time and consideration.

• View comment
• Created 29 June 2023 13:20
• 0 votes

1. Community
2. Maker & Maker+ Support
3. Every toolpath saved has a starting point offset in both X and Y

Hi Darin Murphy, The Set Model Size dialog determines the size of your model within Carveco Maker; Universal Gcode Sender does not consider your model size, but rather the size of the toolpath whic...

• View comment
• Created 28 June 2023 18:47
• 0 votes

1. Community
2. Maker & Maker+ Support
3. Every toolpath saved has a starting point offset in both X and Y

Please also note the following: Looking at the g-code for your loaded "SurfacePlanning02.tap" file in Universal Gcode Sender, Line 5 includes G0X0.000Y0.000, which indicates the start position in ...

• View comment
• Created 28 June 2023 10:19
• 0 votes

1. Community
2. Maker & Maker+ Support
3. Every toolpath saved has a starting point offset in both X and Y

Hi Darin Murphy, Your supplied set of screenshots show that you've: selected the "SainSmart 4030 PROver with Probe (mm) (*.tap)" post processor option when saving your calculated "Genmitsu 3-Flute...

• View comment
• Edited 28 June 2023 09:28
• 0 votes

1. Community
2. Maker & Maker+ Support
3. Maker --> Maker+ Subscription

Hi Reedlabs, We can issue you with a discount code equivalent to the value of the fully unused months in your annual subscription to Carveco Maker, but this would be subject to you deactivating the...

• View comment
• Created 26 June 2023 16:38
• 0 votes

1. Community
2. General Discussion
3. Save time for finishing a 3D model

Hi André Jean, Rest Machining is included in our flagship Carveco product only; we have no plans to include this functionality in Carveco Maker. Thanks for your time and consideration.

• View comment
• Created 20 June 2023 17:39
• 0 votes

1. Community
2. Maker & Maker+ Support
3. Guitar SVG, need help to cut off top part

Hi Michael Sweet, Rather than describing what you're attempting to do in Carveco Maker, please capture and share a screenshot illustrating it when replying in this topic. If you're not familiar wit...

• View comment
• Edited 12 June 2023 10:48
• 0 votes

1. Community
2. Machining Talk
3. Random gcode errors while in progress

Hi Robert Liptrott, Many thanks for sharing the requested information, your Very small box Butterfly releif finishing v3.gcode file and your screenshot captured from Universal Gcode Sender. When us...

• View comment
• Edited 14 June 2023 10:29
• 0 votes