Chris Pellegrino
Posts
-
3D Relief toolpath - can't machine below bottom of material.
I have my material defined (0.77" thick) and am using the bottom of the material as zero. My "reflief" is around the periphery of the material. I am using a ball end mill to get a smooth finish but...
-
Answered
Carveco Maker - have flat area at top of top part/top of material - is getting machined.
I imported a STEP file that has a good portion of the part that is perfectly flat and exactly at the top of the material. Why is Carveco machining this surface? It shouldn't be and I can't figure o...
-
Answered
Won't save out toolpath because it claims Onefinity BB controller doesn't support tool change.
The Onefinity BB controller supports tool changes, but Carveco won't save out the toolpath with two different tools. What gives? Yes, I have the correct machine selected.
-
Answered
Can't delete roughing toolpath
My first time using Carveco Maker. The first time I brought this relief in, I was able to create a roughing path and a finishing path. I wanted to edit these and recalculate, but it would not recal...