Chris Pellegrino
Activity overview
Latest activity by Chris Pellegrino-
Chris Pellegrino commented, I was zeroing off the table top to make it easy making a tool change after the top corner gets machined away. I guess I can use a block of the same MDF so I can zero on the top surface for the seco...
-
Chris Pellegrino created a post, 3D Relief toolpath - can't machine below bottom of material.
I have my material defined (0.77" thick) and am using the bottom of the material as zero. My "reflief" is around the periphery of the material. I am using a ball end mill to get a smooth finish but...
-
Chris Pellegrino commented, Update - got it to work by defining a region with vectors and machining inside that region. Thanks Michael!
-
Chris Pellegrino commented, Thanks Michael - yes, I thought of trying that. After finally figuring out how to automatically get a vector at the boundary of the area I don't want to machine, I told it to machine outside that a...
-
Chris Pellegrino created a post, AnsweredCarveco Maker - have flat area at top of top part/top of material - is getting machined.
I imported a STEP file that has a good portion of the part that is perfectly flat and exactly at the top of the material. Why is Carveco machining this surface? It shouldn't be and I can't figure o...
-
Chris Pellegrino created a post, AnsweredWon't save out toolpath because it claims Onefinity BB controller doesn't support tool change.
The Onefinity BB controller supports tool changes, but Carveco won't save out the toolpath with two different tools. What gives? Yes, I have the correct machine selected.
-
Chris Pellegrino created a post, AnsweredCan't delete roughing toolpath
My first time using Carveco Maker. The first time I brought this relief in, I was able to create a roughing path and a finishing path. I wanted to edit these and recalculate, but it would not recal...