Answered
machine file format help
I can not seem to find anything compatible to generate a working Gcode for my equipment. I have tried several none seem to come out working.
I have a hobby 3018 sainsmart that runs on GBRL controller currently running Candle. The closest I got was an NC format but it took a 5x7 inch work piece and milled a box approx. 1/4 square and that was it
Comments
Hi Michael,
Your post has been escalated to a support request by Carveco Support, and your ticket number is 1741. Please check the inbox associated with your registered email address. Thanks in advance for your time and cooperation.
this has been solved I am saving as Mach 3/4 tap file then using my candle to convert gcode to NC and its working
how do you save a file in gcode format for my 3018 prever
Hi John Greeley,
Please watch the following demonstration video available from our Carveco Training portal: Saving Your Toolpaths
If you're working in imperial units and using:
Thanks for your time and consideration.
Is there a way to add the SainSmart 4040-PRO to the g-code drop-down list when saving toolpath files?
Hi Trevor Johnson,
We intend to include Sainsmart 4040-PRO (inch) (*.tap), Sainsmart 4040-PRO with Probe (inch) (*.tap), Sainsmart 4040-PRO (mm) (*.tap) and Sainsmart 4040-PRO with Probe (mm) (*.tap) post processor options in the Save Toolpaths dialog's Machine file format list as part of the Carveco 1.49 Update.
Thanks in advance for your understanding and patience.
Please sign in to leave a comment.