Michael Jones
Comments
-
this has been solved I am saving as Mach 3/4 tap file then using my candle to convert gcode to NC and its working
-
Haven't seen any videos but just tried again and the letters disappear. This is not my only issue I have tried a few projects none seem to be working. I am just fed up and will be cancelling my Car...
-
Leighton I sent over the stl file using wetransfer to support. I did figure out that you need to manually type the numbers of the position to move it. I also created the words first set at depth of...
-
Barry I figured out that I can not select the STL file to move it around the work area I have to manually move it using the position and just keep changing the numbers until I find the right locati...
-
so when I import an STL file you are saying with this program I am 100% bound to that file and I can not add lettering to it and machine it as one piece? So I will need to create 2 different projec...
-
Leighton I created support under heading manipulating stl and added the 2 files, I appreciate you help and also as mentioned by barry making an stl file into a clipart if that can be done as well
-
I am using Maker. This is an stl file that was purchased. Leighton I have watched all the videos I found it seems they only deal with importing them and changing size and depth. I have tried using ...
-
I ended up created words first but again can not find any tutorial help on selecting the praying hand to move to position. Would also like to flip the hands so fingers facing the words
-