Michael Sherve
Comments
-
Doug, I got to play again tonight, the only thing that's not here is the eagle top center. let me know. the thing is 12 inches square about .400 high but the letters they are .200 the sur...
-
This what I've done in a few hours, I could put it here for you, just have to remember all the stuff I have to do to do it. You could try the v-grove on everything else but this. mike
-
Doug, 20 is way to sharp for wood, by the time you cut it it'd probable go an inch down, 60 isn't too bad it gives good sharp detail, the 90 (45 V bit) would be good too, it all depends on how...
-
Sam, Are you moving to another computer? I am at a loss, what other Library. Sorry if sounding ignorant, I just moved to a new computer and was in the process of setting the thing up the way...
-
Elina, Thanks this is the reason why I asked him for what his vectors looked like, he also might have a border on the outside of his model area I usually do but it's on another layer. ...
-
Doug, What do your vectors (lines) look like? Are you using "Maker", "Maker Plus" or the Pro? Will help me format an answer so you can follow through. Mike
-
Getting old has it's own challenges, like getting new glasses and everything is now out of focus and you have a thousand and 10 things to do. I definitely will investigate this fix. Thank you....
-
Greg, Leighton goes over the Profile tool path, toward the middle of the second half of the 25 minute video he goes over just this issue, How to do a clean up pass. I played with what he suggest...
-
Greg, Check final pass thickness, in your pic you didn't do that, this is the only way the toolpath will do it. Double check the photo I put here and the one you put. mike
-
Greg; Here's a screen shot of the way I do it when I want a slight final pass, try it and see, by the way you didn't specify final pass depth, I used a 100 thousandth and it takes 2 different ...