Michael Sherve
Comments
-
That's cool David, always enjoy seeing what others make, really cool. Mike
-
Forgot to say that when you do the profile toolpath with one of these tapered ball noses you will want to set the cutter to the size of the ball end, if it's an ,125 that is the size you will be wa...
-
John Bloom Do you make chocolate molds? mike
-
Consider toolpath strategy of PROFILE!!!! Nothing but a Profile toolpath is what you need to accomplish what you wish, you, like us all over think things,. What you need to do is cut out your pa...
-
tapered ball end mills can cut shapes faster than a straight bit (end mill) because of the added material in the shaft, if you have a tapered ball with an 1/16 ball it will cut faster than a straig...
-
What do your vectors look like, What is your choice of a tolerance in your toolpaths, mine is .001?? Your bit is a tapered end mill not a v-bit. Mike
-
Oh and welcome. you can always reset the software also, you would have to do a search for how to do that on the forum, for me that would send me bonkers. mike
-
go to the top just as the black starts rt click it you will get your choices if you have the full version of carvecoMike
-
Eric, If you want to save the image of your model as a tiff, open the bitmap you will have at least one layer there highlight it below that you will see what looks like a floppy disk click that...
-
Steve, That is the font itself that lays the letters that way, chose another font. mike