Michael Sherve
Comments
-
Rich, Sometimes a picture can help resolve some problems. I take it you're using Maker or Maker Plus. I use the Pro, I haven't gotten around to installing either of those, so I'll have t...
-
Have you thought of using different sized vectors, inside of the larger ones then running the tool paths? Just an idea. Doing this would cause the tool paths just to mill with in. mike
-
1mm is .039 inches, I take it this is your finishing tool? Mind if I ask what is the size of your model? Okay, for the most part, I, when I have problematic wood that chips I do it in stages of fin...
-
Alexander, I use the tip of the bit on all of my tapered ball's. It's not necessary to worry about too much of the other stuff, the software adjusts the feed and speed, though length woul...
-
Mark, There is another option, You could or rather you should check out maker plus, it has the shape editor, and a few others that are really a great benefit in making undulation and giving fan...
-
Mark, Like I said I work in the pro, learning maker is, well, difficult to say the least, but it can be worked, like cutting circles on a table saw (not the best way but it can be done) You s...
-
Mark, I use Carveco Pro, I had to find a way to view maker, well good new I found a way. The stars, crap they are going to be all contorted, HUH? Well there is a way not to say a lot of wor...
-
Rob, Robust machines are cool, really nifty, I mean it. It isn't the strength of your machine that'll give you success it is the material that's removed and what the bit tears out and how muc...
-
Picture is worth a thousand words. mike
-
I'm sorry, I just reread your request. When you bring in a relief the thing is blue, there are 2 areas that you can chose things to change your file one is "transform options", the other one tha...