Carveco Support

1. Community
2. Maker & Maker+ Support
3. Dead slow

Hi William Skidmore, Please reply to the email dated November 5th 2022 associated with Support Request #10722. Thanks for your time and cooperation.

• View comment
• Created 06 November 2022 11:58
• 0 votes

1. Community
2. Maker & Maker+ Support
3. Zebra Lines on old projects

Hi Wesley Layman, Your post has been escalated to a Support Request by Carveco Support, and the associated ticket number is #10726. However, please note our business hours: What are your business h...

• View comment
• Created 05 November 2022 18:17
• 0 votes

1. Community
2. Maker & Maker+ Support
3. Dead slow

Hi William Skidmore, Your post has been escalated to a Support Request by Carveco Support, and the associated ticket number is #10722. However, please note our business hours: What are your busines...

• View comment
• Created 05 November 2022 14:13
• 0 votes

1. Community
2. Maker & Maker+ Support
3. Why no tools?

Hi Anthony Neldon, Please click the + icon displayed to the left of a tool group's name to display the list of tools within that group.  Please watch the following demonstration video available fro...

• View comment
• Created 31 October 2022 13:39
• 0 votes

1. Community
2. Community Feedback
3. Need to know how to enlarge my icons

Hi Gary Smith, You cannot adjust the size of icons and text within your Carveco software interface. However, you might find that adjusting display settings in your Windows operating system resolves...

• View comment
• Created 31 October 2022 13:36
• 0 votes

1. Community
2. General Discussion
3. Copy and nodes

Hi William Grix, Please try using the Fit Arcs to Vectors tool, displayed by selecting the Vector > Fit Arcs to Vectors menu option in your Carveco software, to reduce the number of spans and nodes...

• View comment
• Created 19 October 2022 20:41
• 0 votes

1. Community
2. Woodworking Talk
3. Drawing with the polyline but giving the specific measurements

Hi Luis Barros, Please watch the following demonstration video available from our Carveco Training portal: Drawing VectorsWhen creating a polyline, as you move the mouse cursor in the view, the len...

• View comment
• Created 19 October 2022 11:48
• 0 votes

1. Community
2. General Discussion
3. Copy and nodes

Hi William Grix, Please confirm what version and build of Carveco you're currently working in by selecting the Help > About Carveco menu option in your Carveco software; this information is include...

• View comment
• Created 19 October 2022 11:40
• 0 votes

1. Community
2. Maker & Maker+ Support
3. Router bit goes too low when starts cutting (breaking the bits)

Hi Luis Barros, We're pleased to hear that your reported machining issue has now been resolved by adjusting your tool parameters. Thanks again for your time and consideration.

• View comment
• Created 17 October 2022 20:45
• 0 votes

1. Community
2. Maker & Maker+ Support
3. Router bit goes too low when starts cutting (breaking the bits)

Hi Luis Barros, Please confirm whether you're selecting the Grbl (inch) (*.gcode) post processor option or the UGS GRBL (inch) (*.gcode) post processor option from the Save Toolpaths dialog's Machi...

• View comment
• Created 15 October 2022 21:01
• 0 votes