Carey Silk
Comments
-
Thanks Leighton I will try and get my head around your method. See the attached link I was looking at for the Easel tutorial. How to do Tiling Using the Easel Pro Tiling Feature and the XCarve - Y...
-
I think I have fixed the problem to a certain degree by changing $3 value to 5, just have to remember to jog the z axis back to front. Have tried all other values thanks anyway
-
Thank You very much that was the answer. Worked easy once you showed me Thanks again
-
Sorry trying to raise it in Z height not Y direction as you have drawn. Like trying to carve an even text engraving depth on a ball
-
With regards to setting up a 4th axis chuck not rotatory is there a way that this can be setup in Maker Plus. Yorahome has a video for setting up the chuck version of the 4th axis but it is using E...
-
https://we.tl/t-bi76JX0oXW
-
YoraHome 3018PRO with extension Kit to 3036 and 500watt motor & 40watt laser upgrades
-
Hi what does $2- actually do I don't understand what a step pulse event is and changing from low to high. Is there a number in the list in the PDF that works with both $2 & $3?
-
In the left to Right direction or X axis all lettering is mirrored. The three peices of text are correct in the Y axis and Z axis Happy Easter Podge
-
I have a YORAHome 3018 PRO with an extension kit and I noticed that there is no GCode file for the YORA. Is there something else I can use that will work properly with the YoraHome or is there a fi...