Charlie Koch
Posts
-
clarification needed for relief carving
if I was to do a rough machine relief carve say feed at 100 in/min and plunge say 50 in/min with a 1/4 end mill does carveco use the lowest number of the two for carving or a finished carve with a...
-
curving vector around a curved line
I am trying to bend the six circles around the inside of the second oval and the same at the bottom After the six circles are in place top and bottom I want to delete the inner oval because it'...
-
Answered
Lost Tool Database
I downloaded and installed the Jenny tool library in Carveco Maker with no problem, BUT now I only have the Jenny Tool Library in my Tool Database. I lost everything else. Does anyone have an idea ...
-
Lost Tool Data Base
I downloaded the Jenny tool data base through Carveco maker with no problem BUT now I only have the Jenny tool base in my data bank I lost everything else. Does anyone have an idea where the rest o...
-
Answered
area clear question
In Carveco Maker, I usually do a rough and finish area clear but I have not been getting a really nice finished edge. If I were to add an allowance to the finished tool path it seems that would be ...