How to eliminate any z roughing passind in toolpath 3d roughing operation
I'm trying to figure out how to stop any z rouging passes when using the toolpath's 3d 'Machine Relief'.
I want the roughing operation to start on the current set z axis, 0, and start any relief without doing flat z pass.
Can't seem to figure that out.
The step down is set at 0.1 inches but if I set that to zero won't that mean that z will never go down?
Also I have the 'Material Setup' so the Material Thickness is the exact thickness of my material so there is no offsets, bottom or top
Thanks
Comments
You want to go straight to the finish machine toolpath? Then do it, don't make a roughing toolpath.
mike
Please sign in to leave a comment.