here is a picture of the seats all round as well {I did a few just to show you } I don't know how much you understand the new artcam but we might need to spend time going through the new tools
in fairness I don't own a seat of Carveco so I don't think its fair to show how Artcam really works on this website … these guys are not willing to sell me a seat at a discount that works for me .I own and have 4 versions that all do the same thing so buying a 5 version to do the same thing does not cut it for me
I am with Mike on the issue of training, New program how do we learn about the tools and what they do. Yes Artcam videos help some what. But many of the videos don't relate to Carveco. I need to get this issue of pave setting on a curved surface answered. I sent the imoji as it was with the distorted prongs and seat because I could wait no longer. I hope I dont lose a new client because of this. I emailed Dillon the model file and no answer yet.
Evonne, did you tell Dillion that you were sending him the file? If not he may not be aware that you have done so. In my experience Dillion is quick to respond.
It has been my experience that support is very quick, down in the lower rt corner if you click support it'll be very quick, they are very good, I have been very happy the way this crew has been for me.
Hi Michael, I just got around to viewing your screen-cast and it is excellent. Many thanks for posting it. I think it is a shame that you were not able to come to terms with Carveco. I hope you stick around, if you don't you will be sorely missed.
Comments
Yes you can you need to use the Lay on surface tool ..Email me I will show you Yebo1@bellsouth.net
Michael, it would be good to explain here so all can benefit. I for one would also like to know how to do this.
Thanks
good idea Barry
here you go .This is a quick look at 2 tools .if you like this I can do more on all the new tools
cheers
https://www.screencast.com/t/dfmKKIabMYI
here is a picture of the seats all round as well {I did a few just to show you } I don't know how much you understand the new artcam but we might need to spend time going through the new tools
cheers
cheers
in fairness I don't own a seat of Carveco so I don't think its fair to show how Artcam really works on this website … these guys are not willing to sell me a seat at a discount that works for me .I own and have 4 versions that all do the same thing so buying a 5 version to do the same thing does not cut it for me
cheers
I am with Mike on the issue of training, New program how do we learn about the tools and what they do. Yes Artcam videos help some what. But many of the videos don't relate to Carveco. I need to get this issue of pave setting on a curved surface answered. I sent the imoji as it was with the distorted prongs and seat because I could wait no longer. I hope I dont lose a new client because of this. I emailed Dillon the model file and no answer yet.
Evonne, did you tell Dillion that you were sending him the file? If not he may not be aware that you have done so. In my experience Dillion is quick to respond.
It has been my experience that support is very quick, down in the lower rt corner if you click support it'll be very quick, they are very good, I have been very happy the way this crew has been for me.
mike
Hi Barry Dilon asked me to send it to him.
Hi Michael, I just got around to viewing your screen-cast and it is excellent. Many thanks for posting it. I think it is a shame that you were not able to come to terms with Carveco. I hope you stick around, if you don't you will be sorely missed.
big difference 2 clicks and holes and prongs are distortion free
cool
Mike,
If you don't mind, could you take a few minutes and explain how you can do this.
can you do this with just the model area or is this just for the assembly area (project verses model)?
with anticipation I wait.
thanks.
mike
Hi Mike
sure I can ..I am away will do when I get back
Thanks Michael.
mike
Please sign in to leave a comment.