Leon Palnau
Comments
-
"Now that I am able to get back to this, I have tested the settings you mentioned above, in the simulation and I think that they may produce better quality as it is using the 1.5 endmill to perform...
-
isn't that what I just did?
-
And by the way, the picture you shared is not a prover 4030 XL. My machine is also using the Carbide 3d router and sweepy V2 dust collection. I learned very quickly that the stock "spindle" does ...
-
I've already went over the mechanicals several times without improvement. I've tested all the mechanical coupler connection by blocking the spindle and trying to rotate the stepper handwheel and al...
-
SainSmart Prover XL 4030, "Sainsmart 4030 PROver (inch) (*.tap)" https://we.tl/t-LI6wRHWn76
-
As I said, I will not be reducing the feed rate and stepdown anymore as it already takes longer than it should to carve. There is no reason why I should have to continue to slow down the machining ...
-
Now that I am able to get back to this, I have tested the settings you mentioned above, in the simulation and I think that they may produce better quality as it is using the 1.5 endmill to perform ...