Leon Palnau
Activity overview
Latest activity by Leon Palnau-
Leon Palnau commented, As I said, I will not be reducing the feed rate and stepdown anymore as it already takes longer than it should to carve. There is no reason why I should have to continue to slow down the machining ...
-
Leon Palnau commented, "Now that I am able to get back to this, I have tested the settings you mentioned above, in the simulation and I think that they may produce better quality as it is using the 1.5 endmill to perform...
-
Leon Palnau commented, isn't that what I just did?
-
Leon Palnau commented, Now that I am able to get back to this, I have tested the settings you mentioned above, in the simulation and I think that they may produce better quality as it is using the 1.5 endmill to perform ...
-
Leon Palnau commented, And by the way, the picture you shared is not a prover 4030 XL. My machine is also using the Carbide 3d router and sweepy V2 dust collection. I learned very quickly that the stock "spindle" does ...
-
Leon Palnau commented, I've already went over the mechanicals several times without improvement. I've tested all the mechanical coupler connection by blocking the spindle and trying to rotate the stepper handwheel and al...
-
Leon Palnau commented, SainSmart Prover XL 4030, "Sainsmart 4030 PROver (inch) (*.tap)" https://we.tl/t-LI6wRHWn76
-
Leon Palnau created a post, AnsweredProblems with area clearance inaccuracy
I am having some issues with some very basic operations that I am struggling to resolve. Let's say I add a number to a square block of wood. I want to clear the area around the number so that the n...