Adrian Walker
Activity overview
Latest activity by Adrian Walker-
Adrian Walker created a post, post processor for a mill turn lathe?
Hi group is it possible to get a post processor for a "Doosan Lynx 2100LSYB" mill turn lathe that has a siemans controller? a
-
Adrian Walker commented, Hi thankyou for your replies, is there a way to use use a champher tool to run along a vector with the Z undulating between a minimum and maxim z depth along the line? I realise i could possibly ...
-
Adrian Walker commented, Hi Mike thankyou for your reply, i will have a try to see if i can replicate that... although i was hoping it could be done with a simple V carve tool, which would make machining simple and quick ...
-
Adrian Walker created a post, Answeredcreate wavy V carve effect
Hi Group how do i create wavy V carve effects like this image in carveco?
-
Adrian Walker commented, Hi mike thankyou for your help. the table leg was just in a video i found i was using it to show that it had the save button in the export section where as in my carveco there was no save button....
-
Adrian Walker created a post, Answeredexport as an stl file
Hi how do i export a file as an stl file for 3d printing, below is an image of the help file but i cant see the 3d object or the icon that is displayed below which is a black square with for white...
-
Adrian Walker commented, Hi Mike thankyou for your input. as you say i need to play and use my imagination. I find the tools in carveco a bit "different" compared to modelling in a 3d cad package but i will get used to it...
-
Adrian Walker created a post, turning a simple bitmap into a nice 3d form demo
Hi Group I am very good with 3d cad and 3d modelling but i get a little confused with carvco as it is a bit different...... 8-)is it possible someone could make a short video on the best way to tur...
-
Adrian Walker commented, Hi thankyou for your responses I will investigate these option on the next job :-)
-
Adrian Walker commented, Hi just to add i used to use smart engrave to get the neat lines at the back but if i select rough tools then it takes away from these lines i.e the engraving cutter doesn't cover the back surface ...