Michael Sherve
Comments
-
Forgot the pic of the vectors. And forgot about the prop, I used the 2 rail sweep but in order to get a close rendition of the shape had to do a lot of thinking, I used the 2 rail sweep 2 times use...
-
Doug, You asked how I did this, I'll see if I can walk you through the steps, in the Pro we have a lot of cool tools to help accomplish our goals and desires, we have the shape editor, the cook...
-
Doug, Let me know the size of material x and y plus the thickness of it in .100's, in the late 70's I was a machinist so I was schooled not in metrics but standard measurements. mike
-
I can send you the file, or rather put it here. I have been using the pro for over 20 years, take great joy in modeling things. The Pro has tools the lower end ones do not, this is why I said I'd ...
-
Doug, I got to play again tonight, the only thing that's not here is the eagle top center. let me know. the thing is 12 inches square about .400 high but the letters they are .200 the sur...
-
This what I've done in a few hours, I could put it here for you, just have to remember all the stuff I have to do to do it. You could try the v-grove on everything else but this. mike
-
Doug, 20 is way to sharp for wood, by the time you cut it it'd probable go an inch down, 60 isn't too bad it gives good sharp detail, the 90 (45 V bit) would be good too, it all depends on how...
-
Sam, Are you moving to another computer? I am at a loss, what other Library. Sorry if sounding ignorant, I just moved to a new computer and was in the process of setting the thing up the way...
-
Elina, Thanks this is the reason why I asked him for what his vectors looked like, he also might have a border on the outside of his model area I usually do but it's on another layer. ...
-
Doug, What do your vectors (lines) look like? Are you using "Maker", "Maker Plus" or the Pro? Will help me format an answer so you can follow through. Mike