Michael Sherve
Comments
-
Hi Evonne why not try the support again you know in the lower rt hand corner. Dillon might be on vacation, or you might have used an old e-mail address (I don't know just speculating) mike
-
computers were meant to be use with the skills we learned at "naught word university" sounds like a dll got confused. Am glad that you will get to play with the sculpting tools. have a great ...
-
Could you have some other program that might be getting in the way of carveco? Years ago I had a problem with Norton av. being a problem child with artcam, somewhere along the line they fixed what ...
-
Bob, Has it been determined that what's causing your issue yet? I am sort of interested, rather curious, really very. mike
-
It has been my experience that support is very quick, down in the lower rt corner if you click support it'll be very quick, they are very good, I have been very happy the way this crew has been for...
-
Bob, The support for carveco is great, I have use it a few (ok, maybe more than a few) times (mainly because I am a little dense) but in all the times I have done a chat with them (other than th...
-
Go to the bottom of the sculpting tools setting check tow boxes to know where you are and what you are sculpting, very beneficial, if you can see what the tool is doing you will have a better resul...
-
Not meaning to sound condescending, but do you have a black spot when you put your cursor on the object that you want to sculpt? You do know that you have to sculpt manually? I'll see if I have ti...
-
ok what I just did took all of 2 minutes, did your 20inch circle then increased your inner to 19.25, then did a centered one at 19.625 then did a .125 circle centered it on the one between the othe...
-
grab hold of outside vector use transform vector tool increase size, then do the same for the smaller one. easy peasy. OH, make sure you have keep aspect ratio locked, doing this will keep you from...