Michael Sherve
Comments
-
Every time I have had a problem, especially highly intense ones I have gotten with support they have always given me help, they can guild you through this issue. If you need the sight ca...
-
Shawn, Have you tried to bring your toolpaths to your control computer by usb (jump drive)? Don't know why it would ask if you want to change the toolpath, unless you didn't do something (it's...
-
Here's the tool mike
-
Thanks Elina. mike
-
Wood is one of those fantastic materials that you can do a lot with, but it does have its limitations one of which it will break easily when too thin, this is the way your work appears. First...
-
I have stuck with 2 sometimes 4 toolpaths, I should check everything out and work with them but I figure if it works well why change, plus I have too many things running through my head to remember...
-
Matthew here's a tulip I started a bout a year or so for a fellow, he declind but its here if you want I do believe you'll have 3 days to get it. https://we.tl/t-QsYBW6Zho1 mike
-
Matthew, I was thinking again (dangerous) anyway if you were to take the offset vector tool and enlarge the vector say .04" (if you use a 1/16" ball end) you could do everything you want the way...
-
Matthew, Ideas: I was thinking If you used the shape editor to bring up your relief say .025 to .50 then use your v-bit, see how that would turn out, or use the "draft tool" to put a 25 to 40 degr...
-