Gary Beckwith
Comments
-
Usually those machine dots are areas where the size of the tooling is calculated to fit within the vector area. Easiest way to tell is do another toolpath and double the tool diameter size, if the ...
-
Its telling you that Carveco did some updates to their internal server to allow subscription base versions of Carveco to be processed. Gary
-
you will find all the release notes HERE Gary
-
Without seeing your settings this will just be an assumption. But I expect your roughing pass is set to leave .02 on for the finishing pass therefore the finishing pass will machine the complete re...
-
I don't know Mike looks more like a tongue than flames. For flames I would move the start outside the mouth. Gary
-
Mike, I don't know what your dragon looks like but I think your over thinking the detail of the flame. I would go with something like the image on the bottom right corner, 2 R sweep and a couple of...
-
You might read the FAQ section "Are my Artcam files compatible....." That should clarify converting files Gary
-
ArtCam file originating from any version of ArtCAM software between 2013.SP2 and 2018.2.1 are compatible with Carveco™ software. Pre 2013SP2 files you would need to open and re-save in 2013.SP2 or ...
-
Brady, they are no longer called zero, zero rest, couple of years ago they got moved and relabeled "zero inside vector, "zero outside vector". You should have a play with creating your own layout a...
-
Brady, if you separate them out then it lets support mark them as needed such as "Under Review", "Planned" or "Implemented" It also lets other members of the community respond to just the one reque...