Matthew Polhemus
Activity overview
Latest activity by Matthew Polhemus-
Matthew Polhemus commented, Hey Mike, Appreciate the feedback first off. Currently I have worked a combination of 2D raster using an end mill to remove most material and the v-bit at the perimeter. Then, 3D relief the tulips....
-
Matthew Polhemus commented, The "Stacked" term is that I have graphics at different levels that overlap into 1 design. Attached are pictures of another project I did that uses Mountains instead of tulips. Still have issues wi...
-
Matthew Polhemus commented, I am creating a stacked text sign. For each layer I use a vcarve toolpath with a roughing end mill to create an angled border around everything. I don't need to have an angled border around everyth...
-
Matthew Polhemus commented, No matter how I move over my V-bit I still get the trench effect. Even if I do the second layer v-bit first and then 3D relief the simulation still gives me the trench.
-
Matthew Polhemus commented, My tolerance is set to .0001 but for some reason the v-bit cutter doesn't come over enough. Thinking more about it my cut sequence. I have 2 layers with the top layer have just v-bit work around le...
-
Matthew Polhemus created a post, Combing Machine Relief and Raster Toolpaths
I am making a layered sign and using both text and 3D reliefs. I created a vector boundary of the relief so that the machine relief toolpath stays around the 3D relief. From there I am using a rast...