Greg Porter
Activity overview
Latest activity by Greg Porter-
Greg Porter commented, I’m not trying to do a final pass thickness. Only trying to do final pass allowance. To clean up the edges.
-
Greg Porter commented, Thanks. Thats the same setup I am doing. I think there is a bug on my application or something. I do need to update to the latest version. I will try that. I dont need a final thickness on this p...
-
Greg Porter commented, Here's a snapshot of the simulation. I also fixed the final pass from .01 to -.01.
-
Greg Porter created a post, Profile & Final Pass - skipping straight to final pass
I have 35" rectangle Profile pass. Total depth .95 inches. I selected the final pass allowance to be .01 inches. The first toolpath is not performing. I can see this also in the simulation. Only th...
-
Greg Porter created a post, Anyone selling .art files?
Anyone have an etsy store or something where you are selling Carveco files? Specifically kitchen spatulas or stuff like that? I know could buy stl files but this saves a step. Just curious.
-
Greg Porter commented, Actually this was helpful. Thank you. Everyone has their own methods. Love seeing other ideas. I decided to duplicate my Carveco Model files. On the second file, I flipped the model around. Left si...
-
Greg Porter created a post, AnsweredPaneling help
First time using Paneling Toolpaths. I have a project that is 5.5" wide x 60" high. Trying to see how I can flip my wood around rather than pushing the wood through the machine. I am limited in spa...
-
Greg Porter commented, After pondering more, my guess is that I used my 1/8" End Mill accidentally for my 90 degree V Bit toolpath. SMH.... before I trash this piece, I might plane it .10" or so to see if I get rid of th...
-
Greg Porter created a post, V-Bit Carving issue
Hi, I'm using Carveco Maker. Does my V-Bit Carving toolpath look ok? My letters look like dog bones and the center didn't carve out at the same depth. I suspect it is a matter of me saving one of t...