Unable to select text or any other component in the base of the relief
Hi I have a model that has a CarveCo frame relief and an imported 3D .STL with machining setup. Now I want to add text on the base of the carved out relief. The text went in but I am unable to select it or use the transform or select text to change or to add a toolpath. It also won't let me select a depth for the cut.when I have to select node edit to get to select the transform option, then I am able to load the toolpath mode but can't reselect the text The base of the relief is -11.998mm and I want to carve text 1.5mm deep so in the finish depth I have tried start as minus 11.998 then minus 13.5mm to get a finish depth and also tried 0 start and minus 13.5. and still won't accept the toolpath.
I have watched the many videos and in those they are always able to add other clipart and text and be able to select but I don't seem to be able to select anything after the relief is created. Even when trying to click and hold to select the text all I can do is turn the 3d model around. Same with trying to create a relief border
What am I not doing correctly
Thanks
What am I doing wrong
Comments
Hi Carey Silk,
Your post has been escalated to a support request by Carveco Support, and the associated ticket is #9223.
Thanks for your time and consideration.
Please sign in to leave a comment.