Answered

finish depth in 3d finishing

Charalampos Oikonomidis

07 September 2020 10:01

hello

how i can set different finish depth in 3d finishing like i can do it in roughing?

3 comments

Carveco Support
08 September 2020 10:53

Hi Charalampos,

Please confirm what Carveco product you're working in and your associated Order Number; select the Help > About Carveco menu option to display the About box to find this information.

Thanks in advance for your time and cooperation.

0

Comment actions Permalink
Carveco Support
08 September 2020 12:18 (Edited 08 September 2020 12:26)
Many thanks for your response, Charalampos.

The same question from you has already been answered in the Carveco Maker and Maker Plus Users Group on Facebook; please note that you are using our flagship Carveco product rather than Maker or Maker+.

You have been advised that you can:
- change the zero plane position by adjusting the Material Setup dialog's Model Position in Material settings.
- select the Machine Relief panel's Raster (Classic) Tool Clearance Strategy followed by the Do Multiple Z Passes check box.
If you have any further questions, please choose which platform you want to continue the same discussion on.

Thanks in advance for your time and cooperation.
0

Comment actions Permalink

Please sign in to leave a comment.

New post