Answered
zero position at 3d relief (newbie)
I created a model using wolfscene from library clipart
I changed the dimensions to be 100mm height and 15mm z range
When creating the toolpath indeed the suggested safe Z was 16 mm which I changed to 2, and the suggested material thickness was 15mm
When creating Gcode and opening in my CXNC SW the Z was only -10.036 mm
Any idea?
I use maker
https://www.dropbox.com/s/yegbey5n2jhl4at/wolfscene.art?dl=0
https://www.dropbox.com/s/ute65fzl4wjj38b/wolfscene.gcode?dl=0
Comments
Hi Roni Segoly,
There are no calculated toolpaths in your shared wolfscene.art file, and the Material Setup hasn't been specified yet either. Do you have a copy of the Carveco Model file (*.art) from which your shared wolfscene.gcode file originates? If you do, please share it with the community.
Thanks for your time and consideration.
Strange
Trying again
https://www.dropbox.com/s/wo21lp65weji6y3/wolfscene1.gcode?dl=0
https://www.dropbox.com/s/7kiduvbyzszb0t2/wolfscene1.art?dl=0
found my issue, my bad
Please sign in to leave a comment.