Answered
Carving going outside of model area
Hi All,
I'm relatively new to the CNC world and this is the first time I have run into this issue. I'm trying to make a salt cellar in Carveco Maker+ and when I try the Area Clearance toolpath for the middle and have a bowl bit for some reason the CNC is going beyond the size in the model area. The area I want to clear is 2.75" wide and am using an Amana Tool 45982 bowl/tray bit. I'm not sure if I am missing something simple or using the wrong style bit here, but any help would be greatly appreciated.
Thanks
Comments
Hi MarcT,
Without access to your Carveco Model file (.art), we cannot identify any potential issues with your vector artwork and it is impossible to check your toolpath settings. Please save and upload your Carveco Model file (.art) using the free WeTransfer service using their Get transfer link option, and then share the generated link when replying here.
When replying, please confirm the manufacturer and model of your CNC machine, the controller you're using alongside it, and the exact name of the post processor option which you're currently selecting from the Save Toolpaths dialog's Machine file format list when saving your calculated toolpaths from Carveco Maker+.
In addition, when posting, please make use of screenshots to illustrate your reported issue. If you're not familiar with capturing screenshots, please review the following Microsoft support article: Use Snipping Tool to capture screenshots
Thanks for your time and consideration.
Please sign in to leave a comment.