Answered
Surfacing toolpaths
Hello,
I'm having problems with the surfacing toolpaths (raster) in Carveco Maker. I'm just trying to surface a spoil board. I set up the surface, the bit is a 1.25 surfacing bit. Everything looks good, but when I run it, it leaves a small bit of the corner on each corner. It does it to me every time. I'm sure I'm missing something on my set up. Anyone know what to do?
Comments
My solution would be to increase the Y height and X width to the width of your bit and center the toolpath to whatever you're surfacing. Also, be sure the piece your surfacing is squared to the machine, and your XY zero is set to the center of the piece you're surfacing.
Please sign in to leave a comment.