Answered
Masso G3 wrong tool called for
Carveco Maker + Build 1.48
Masso G3 version is 5 axis v 5.06
I have a Onefinity Elite Foreman. I chose a 1/4" end mill for a roughing path and
a 1/4" ball nose for the finish pass. Program ran perfect on the roughing pass but when Masso requested the second tool it requested a 1/16" end mill instead of the 1/4" ball nose. I have checked the g code and the correct tools are called out. Anyone else run into this? If so, how did you fix it. New to CNC so any help is appreciated.
Comments
Hi Thomas Johnson,
It is our understanding that there is a set of approximately three default tools loaded into memory on the Masso controller. Please confirm whether you've configured the tools which you've used when calculating your toolpaths in Carveco Maker+ in the Masso controller itself.
If you require support with using the Masso controller, please contact Onefinity Support: https://www.onefinitycnc.com/support
Thanks for your time and consideration.
Please sign in to leave a comment.