Please explain what you mean by "running blank", preferably with screenshots to illustrate your toolpath settings and your results within Carveco Maker. If you're not familiar with capturing screenshots, please review the following Microsoft support article: Use Snipping Tool to capture screenshots
In addition, please watch the following demonstration video available from our Carveco Training portal: Machining Simulation
As previously requested, please provide an additional screenshot showing your toolpath settings.
Alternatively, please upload your Carveco Model file (*.art) using the free WeTransfer service and then share the generated link when replying here. We can then investigate your reported issue.
Comments
Hi Gary Brace,
Please explain what you mean by "running blank", preferably with screenshots to illustrate your toolpath settings and your results within Carveco Maker. If you're not familiar with capturing screenshots, please review the following Microsoft support article: Use Snipping Tool to capture screenshots
In addition, please watch the following demonstration video available from our Carveco Training portal: Machining Simulation
Thanks for your time and cooperation.
Hi Gary Brace,
As previously requested, please provide an additional screenshot showing your toolpath settings.
Alternatively, please upload your Carveco Model file (*.art) using the free WeTransfer service and then share the generated link when replying here. We can then investigate your reported issue.
Thanks again for your time and cooperation.
Please sign in to leave a comment.