Brady Watson
High Definition 3D Scanning www.IBILD.com
Comments
-
Joe, My guess would be your video card drivers are out of date.
-
Jen, What Barry points out is worth noting...If you don't export the STL with a closed back/plane, the mesh will be open on the back and not watertight. Also, don't be surprised if you get giant tr...
-
It could be a number of things...Your video card, video driver, or settings. It could be a relief with unrealistic Z height - like 25" instead of 0.25" etc. Update your video driver and see if that...
-
Barry, In all honesty, I don't think you've actually used Aspire in recent days. If you did, you'd understand what I meant by an intuitive interface. Don't get me wrong, the spirit of my post in no...
-
Bill, I do...CarveCo does permit higher resolution relief generation than Vectric, and a few other unique tools and features on the CAD side of things. There are certain CAM functions as well that ...
-
Great idea Mike.
-
3 options... 1) Create a toolpath for each pencil using toolpath template(s). 2) Hand edit GCode with pause keyword/statement/routine for your controller for each line (really not hard - copy/paste...
-
The thing is...the vcarving engine isn't made for that type of tool. It's only made for either a proper vbit with a sharp point or a ball end mill. Taper tools are not officially supported with tha...
-
The tool is most likely not defined properly. The specs listed in the tool database most likely do not match real world measurements. This is actually quite common with v-bits where the advertised ...
-
Just click the '?' on the blue bar that says 'Tool Settings: Transform'. This will toggle help and labels on and off for all tools across the program.