CAD/CAM ELINA P
Freelance designer - 2D and Bas relief models on request. Based in Greece, collaborating worldwide.
Activity overview
Latest activity by CAD/CAM ELINA P-
CAD/CAM ELINA P commented, Hi Athol, Could you please share a screenshot as it might show something that we miss? I cannot thing of many issue possibilities.. maybe you can double-check the 'Primary Color' selected or the cu...
-
CAD/CAM ELINA P commented, Hi Charlie, Does Carveco Maker have this tool? Paste Along a Curve. If so, try it out, or I could explain what you need to do.. Elina.
-
CAD/CAM ELINA P commented, Hi Bayne, I totally understand your issue.. Unfortunately there is no option to make the nodes bigger. As Mike advised, you can set a few things under 'Options' (in my opinion, the thinner the vect...
-
CAD/CAM ELINA P commented, Hi Guillermo, I understand what you're saying... However, it's quite clear that nesting doesn't work with open vectors. So, since you really need to keep these open vectors, then I'd suggest to fol...
-
CAD/CAM ELINA P commented, Hi Guillermo, I'm not an expert regarding toolpaths... but this info might help! When the window is open, click the little question mark on the top right, and all info will be displayed. Then, if y...
-
CAD/CAM ELINA P commented, Hi James, Firstly, make sure that the right vectors belong to the right layers (in case they're all still in Default) but I assume this is not the issue.. As you said, and it's true, when a layer i...
-
CAD/CAM ELINA P commented, Hi Mark, There is nothing wrong with your design. Every green mark shows where the vectors intersect with each other. It makes sense that they cannot be joined as one continuous closed vector. In c...
-
CAD/CAM ELINA P commented, Okey, I see!! Now I get it... many thanks for these mike!
-
CAD/CAM ELINA P commented, Hi Mike, just out of curiosity.. could you share the initial pictures that were converted to a relief? To be honest, I haven't experimented with AI at all (yes.. still thinking about it)! That's wh...
-
CAD/CAM ELINA P commented, Hi Laurence, It's true Vector Doctor is a bit sensitive. Next time, try changing the Tolerance. Regarding the Fillet tool, it only works on straight lines and arcs, not polylines. What you need to ...